AT&T SynJ SB67158 User Manual Download

Page: 65 / 116

Telephone base operation

Push to talk (PTT) intercom

Answer a PTT call

1. When you hear two beeps, the screen displays

PTT from: X:Handset X

(

represents the extension number [

Handset X

represents the

handset name), or

PTT from: X:Deskset X

(

represents the extension

number [

Deskset X

represents the handset name).

2. Press

INT

to convert the call into a normal intercom call with that

extension.

-OR-

Respond with a new PTT call. Wait for the end of the three-second PTT wait

state (the screen changes to idle mode). To respond with the telephone
base, see

PTT to a single device

PTT to all devices

on the previous

page. To respond with a handset, see

Answer a PTT call

in the SynJ

SB67108 handset manual or SynJ SB67148 deskset manual.

NOTE:

If the PTT call is sent to all handsets, an intercom call is established with the first

person who presses

INT

Convert a PTT call to an intercom call

You can convert the PTT call to a two-way intercom call on the called
telephone base.

1. Press

INT

on the called extension to convert the call to a two-way

intercom call.

2. Optionally, put the corded handset on the telephone base or press

SPEAKER

to end the intercom.

End a PTT call

Press

EXIT

to end the incoming PTT call.

•

Summary of Contents for SynJ SB67158





















































































































Search results

Summary of Contents for SynJ SB67158

Reviews:

Related manuals for SynJ SB67158

Brands by name

Popular brands

AT&T SynJ SB67158, User Manual

Search results

Summary of Contents for SynJ SB67158

Reviews:

Related manuals for SynJ SB67158

Brands by name

Popular brands