Syn248 Installation and Configuration Guide
System Configuration
28
5. Enter
admin
in the
Login Name
field and
12345
in the
Password
field, then click
. You may change the Admin ID and password once you are logged in.
The
System Information
page appears.
The
System Information
page displays the count of Desksets and Gateways. You can
also expand the
System Information
page to display
Detailed System Information
,
which lists information specific to each installed device (such as the
IP Address
and
Software Version
).
Click topics from the navigation menu on the left side of the WebUI to see them. You
view and change settings in two different types of fields: drop-down lists and entry fields
into which you type information. For your security, the WebUI times out after 10 minutes,
so if it is idle for that time, you must log in again.
The remaining procedures in this chapter assume that you are already logged in to the
WebUI as administrator.
In most cases there are multiple settings on one page. Changing a setting does
not instantly apply the new value. Click
on the WebUI to save all
changes on that page.
Changes made on the WebUI are transmitted to all connected devices when
applied. If changes are being made at the Deskset and WebUI simultaneously, a
first-come-first-served policy on resource allocation applies. System
configuration changes are transmitted globally when you press
on the
Deskset or click
on the WebUI.
Save
