AT&T Merlin 1030 Administration Manual Download Page 190

Page: 190 / 191

Quick Reference Guide to Administration Procedures

(continued)

Procedure

Touch

Then

CUSTOMIZE WITH OTHER SYSTEM OPTIONS (continued)

Administer Enhanced Night

Service (continued)

To remove Outward

Adm Misc

• Dial #309.

Restriction

• Touch Drop.
• Touch Adm Misc.

To set up a list of emergency

Adm Misc

• Dial #310.

numbers

• Dial entry number (0 through 9).
• Dial telephone number.
• Touch Adm Misc.

To set up an Exclusion list

Adm Misc

• Dial #308.
• Touch Auto Intercom button representing voice terminal.

Steady green on = assigned to group

green off = not assigned to group

• Touch Adm Misc.

To set times for Night Service

Adm Misc

• Dial #311.

to go on and off automatically

• Dial number of day of week (0 through 6).

on a particular day of the

• Dial start time using 24-hour clock (2 digits for hour, 2 digits for

week

minute).

• Dial #312.
• Dial number of day of week (0 through 6).

• Dial stop time using 24-hour clock (2 digits for hour, 2 digits for

minute).

• Touch Adm Misc.

To enable Time Set Night

Adm Misc

• Dial #313.

Service by recording current

• Dial number of current day of week (0 through 6).

day

•l Touch Adm Misc.

To suspend Night Service

Adm Misc

• Dial #313.

with Time Set

• Dial 9.
• Touch Adm Misc.

To get a printout of Enhanced

Adm Misc

• Dial #907 and wait for beep.

Night Service Information

• Touch Adm Misc.

Assign System Speed Dial

Conference

• Dial 0.

codes.

• Dial System Speed Dial Codes (#60 through #99) and * if

marked code.

(See page 96.)

• Dial telephone number.
• Touch Conference two times.

Get a printout of System

Adm Misc

• Dial #901 and wait for beep.

Speed Dial codes.

• Touch Adm Misc.

Administer Station Message

Adm Misc

• Dial #300, then dial current time using 24-hour clock (2 digits

Detail Recording (SMDR)

for hour, 2 digits for minute).

options.

• Dial #301, then dial current date (2 digits for month, 2 digits for

day, 2 digits for year).

(See page 99.)

• Dial #390, then set minimum call duration (2 digits for minutes)
• Dial #3910 to record outgoing calls only

Dial #3911 to record outgoing and incoming calls.

• Touch Adm Misc.

To get a printout of SMDR

Adm Misc

• Dial #905 or #390#900 and wait for beep.

options.

• Touch Adm Misc.

187

Summary of Contents for Merlin 1030































































































































































































Search results

Summary of Contents for Merlin 1030

Reviews:

AT&T Merlin 1030, Administration Manual, Page: 190 / 191

Search results

Summary of Contents for Merlin 1030

Reviews: