AT&T Merlin 1030 Administration Manual Download Page 186

Page: 186 / 191

Quick Reference Guide to Administration Procedures

This chart summarizes the administrative procedures described on pages 29 through 126. For more information about
a procedure, refer to the page listed.

Before you perform any of these procedures, enter administration mode by following the steps below.

• Set switch A on the Processor Module in the control unit to Administer (down).

• Insert the administration mode button labels (seethe back of this manual) in the administrator/attendant console.

• Slide the T/P switch on the left side of the console to P.

When you finish administering your system, leave administration mode by following the steps below.

• Slide the T/P switch to the center position.

• Set switch A on the Processor Module to Attendant (up).

• Remove the administration mode button labels from the console and insert the regular call-handling labels used

by the attendant.

NOTE: If you have an economy administrator/attendant console, perform this procedure instead of touching an
Auto Intercom button:

• Dial the intercom number to identify a voice terminal.

• Touch Hold and dial the intercom number to add a voice terminal to a group or list.

• Touch Drop and dial the intercom number to remove a voice terminal from a group or list.

• Touch Drop and then touch * to remove all the voice terminals from a group or list.

Procedure

Touch

Then

PERFORM BASIC ADMINISTRATION

Specify Touch-Tone or rotary

Adm Misc

• Dial #302.

signaling.

• Touch line buttons.

Steady green on = Touch-Tone

(See page 29.)

Green off = rotary

• Touch Adm Misc.

Set system to work with Call

Adm Misc

• Dial #3141.

Management System (CMS)

• Touch Adm Misc.

Set system to work without

Adm Misc

• Dial #3140.

CMS (default)

• Touch Adm Misc.

(See page 30.)

Assign lines to voice ter-

Adm Tel

• Touch Auto Intercom button representing voice terminal.

minals in square systems.

• Touch line buttons.

Steady green on

= line is assigned

(See page 31.)

Green off = line is not assigned

• Touch Adm Tel.

Set up line pools in pooled

Adm Pool

• Dial pool code (9 for main pool or 890 through 899 for additional

systems.

pools) if administering more than one line pool.

• Touch line buttons.

(See page 35.)

Steady red on

= line is in pool

Red off

= line is not in pool

• Touch Adm Pool.

183

Summary of Contents for Merlin 1030































































































































































































Search results

Summary of Contents for Merlin 1030

Reviews:

Brands by name

Popular brands

AT&T Merlin 1030, Administration Manual

Search results

Summary of Contents for Merlin 1030

Reviews:

Brands by name

Popular brands