AT&T EP5632 User Manual Download

Page: 68 / 119

Telephone operations

Receive a HOME call while on a CELLULAR call

While on a

CELLULAR

call and there is an

incoming

HOME

call,

HOME

and the

status

icon will flash on the handset and telephone base
display and you will hear a short beep.

To answer the incoming

HOME

call:

• Press

HOME

on the handset or telephone

base.

- The

CELLULAR

line call will automatically

be placed on hold and

Cell call on hold

will appear on the display.

To end the

HOME

call:

• Press

OFF/

CANCEL

on the handset or

HOME

on the telephone base.

- The

CELLULAR

line will still be on hold.

To resume the

CELLULAR

call on hold:

• Press

CELLULAR

on the handset or

telephone base.

For information about the hold feature, see
page 62.

NOTE:

If the

answering system is on
and you do not answer
an incoming

HOME

call

while on the

CELLULAR

line, the incoming

HOME

line call will

be answered by the
answering system.

Summary of Contents for EP5632
























































































































Search results

Summary of Contents for EP5632

Reviews:

Related manuals for EP5632

Brands by name

Popular brands

AT&T EP5632, User Manual

Search results

Summary of Contents for EP5632

Reviews:

Related manuals for EP5632

Brands by name

Popular brands