AT&T DECT EL52419 User Manual Download Page 50

Page: 50 / 73

Alert tones and lights

Handset screen icons

Battery status

- battery is charging (animated

displayed).

Battery status

- low battery (flashing); place

handset in telephone base or charger to recharge.

SPEAKERPHONE

- the speakerphone is in use.

Ringer off

- the handset ringer is turned off.

NEW VOICEMAIL

- new voicemail received from

the local telephone company.

ANS ON

Answering system is turned on.

Message

- new message in the answering

system.

NEW

Missed and unreviewed calls.

MUTE

Microphone is muted.

Message counter

- number of message playing.

Handset alert tones

Two short beeps

You are pressing the

CID

DIR

keys when the

volume is already at its highest or lowest setting.

Four short beeps

Low battery warning.

Three beeps

Out of range while the handset is on a call.

Three rising tone

The telephone has completed the command successfully.

Telephone base tone

Beeps every 10 seconds

Message alert.

Lights

CHARGE

On when handset is
charging in the telephone
base or charger.

SPEAKER

On when
speakerphone is
in use.

ANSWER ON

Lit when the
answering system
is on and ready to
receive calls.

VOICEMAIL

Flashes when you have new

voicemail. Voicemail is a service

offered by your local telephone

company, and is different from

answering system messages.

IN USE

Lit when handset is in use
or when the answering
system is answering an
incoming call.
Flashes when another
telephone is in use on the
same line.
Flashes quickly when
there is an incoming call.

Lighted keypad

10:21

NEW

MUTE

ANS ON

1/2

MSG#

1/2

MSG#

Lighted display

Appendix A

Summary of Contents for DECT EL52419










































































Search results

Summary of Contents for DECT EL52419

Reviews:

Related manuals for DECT EL52419

Brands by name

Popular brands

AT&T DECT EL52419, User Manual

Search results

Summary of Contents for DECT EL52419

Reviews:

Related manuals for DECT EL52419

Brands by name

Popular brands