AT&T CL84107 Complete User'S Manual Download

Page: 156 / 160

Appendix

150

Technical specifications

Operation

Operating time*

Talk time (cordless handset)

Up to 10 hours

Talk time (cordless handset speakerphone)

Up to 5 hours

Standby

Up to 7 days

* Operating times vary depending on your actual use and the age of the battery.

DECT 6.0 digital technology

The AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity. This

is achieved through a unique antenna design and advances in noise-filtering technology. An

independent laboratory has confirmed that AT&T DECT 6.0 products perform up to 45% better in

range competitions against similarly equipped phones of the leading competition. Now, calls can

be taken in the basement, backyard and garage with exceptional sound quality.

Telephone operating range

This cordless telephone operates within the maximum power allowed by the Federal

Communications Commission (FCC). Even so, this handset and telephone base can communicate

over a certain distance — which can vary with the locations of the telephone base and handset,

the weather, and the construction of your home or office.

Redefining long range coverage and clarity

This telephone base comes with an antenna which gives much better clarity and covers a longer

range than before.

HD audio

HD audio improves sound quality by expanding and rebuilding frequencies that are lost with

traditional phone calls. There is no additional telephone service requirement to use HD audio.
It is designed to work with standard telephone service. Your system will automatically enhance

all received sound with HD audio.

Simulated full-duplex handset speakerphone

The simulated full-duplex speakerphones on your handset and telephone base allow both ends of

a call to speak and be heard at the same time. Optimal performance is subject to external factors

and individual usage.

RF frequency band

1921.536MHz - 1928.448MHz

Channels

Telephone base voltage

(AC voltage, 60Hz)

96Vrms - 130Vrms

Telephone base voltage

(AC adapter output)

6VDC @ 600mA

Handset voltage

2.4V 400mAh, 2 x AAA Ni-MH

Charger voltage

(AC adapter output)

6VDC @ 100mA

Summary of Contents for CL84107

































































































































































Search results

Summary of Contents for CL84107

Reviews:

Related manuals for CL84107

Brands by name

Popular brands

AT&T CL84107, Complete User'S Manual

Search results

Summary of Contents for CL84107

Reviews:

Related manuals for CL84107

Brands by name

Popular brands