background image

Appendix

132

Screen display messages

Screen messages

Saved to 

directory

An entry has been successfully saved in the directory.

Screened call

The Smart call blocker feature of the telephone has screened a 

call, and is putting the call through and waiting for you to pick up 

the call.

Setting up  
Answering sys...

The telephone base is playing voice guide.

Smart Call blk 
screening...

The telephone is screening an incoming call.

Speaker

The handset or telephone base speakerphone is in use.

TRANSFER TO:

You have started transferring a call, and need to enter the 

desired device number or choose all devices.

To register HS, 
see manual.

Screen display before handset registration.

To screen call, 
press [SELECT]

Press 

MENU/SELECT

 to activate call screening on the handset.

Unable to call. 
Line in use

Failed phone call (the telephone line is in use). 

Unable to call. 
Try again

You try to join a call when there are already four handsets on that call.
You try to make an outside call when another device is 

transferring a call with the intercom feature.

XX Missed calls

There are new calls in the caller ID log.

XX New messages

There are new messages in the answering system.

Summary of Contents for CL84107

































































































































































Reviews: