Multiple handset use
54
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single handset. When the
telephone base is not in use:
f
f
If you have one handset, press and hold
FLASH
/PTT
.
f
f
If you have more than one handset:
w
Press
FLASH
/PTT
, then, use the dialing keys to
enter the destination handset number.
-OR-
w
Press
q
CID
or
p
DIR
to highlight the destination
handset number, then press
MENU
/SELECT
or
FLASH
/PTT
.
The telephone base shows
Connecting to HANDSET
X...
(
HANDSET
represents the handset name,
X
represents the destination handset number) for a
few seconds. When the connection is made, both the
telephone base and destination handset display
Press and hold [PTT] to talk
.
2. Press and hold
FLASH
/PTT
. A chirp indicates your
microphone is on. Speak towards the telephone base.
Your voice is broadcast to the destination handset.
While you are speaking, the telephone base shows
PTT To handset: X
.
3. Release
FLASH
/PTT
after speaking. Both devices beep once again
and the screens show
Press and hold [PTT] to talk
. Then, you can
press and hold
FLASH
/PTT
to continue speaking or the destination device
can respond (see
Answer a PTT call
on page 56).
4. To end the PTT call, press
CANCEL
. The telephone base shows
Push to talk Ended
for a few seconds.
fffff
PTT To
handset: X
fffff
Connecting to
HANDSET X...
fffff
Press and hold
[PTT] to talk
fffff
PUSH TO TALK
>HANDSET X
p
q
