background image

9

TELEPHONE OPERATION

Operating Range

This cordless telephone operates within the maximum power allowed by
the Federal Communications Commission (FCC). Even so, this handset and
base can communicate over only a certain distance — which can vary with
the locations of the base and handset, the weather, and the construction of
your home or office. For best performance, keep the base antenna fully
upright.

If you receive a call while you are out of range,

the handset might not

ring — or if it does ring, the call might not connect when you press 

P

.

Move closer to the base, then press 

P

to answer the call.

If you move out of range during a phone conversation,

you might

hear noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing 

O

, your phone will be

left “off the hook.” To hang up properly, walk back into range, periodically
pressing 

O

.

Display Screen Messages

Screen Displays:

When:

NO LINE

The base is not connected to the telephone line,
or the line is not working.

RINGING

There is a call coming in.

CONNECTING

The handset is waiting for a dial tone.

PHONE

The handset is in use.

PAGING

The base is paging the handset.

HOLD

There is a call on hold.

EXTENSION IN USE

Another extension on this line is off hook.

BATTERY LOW

The battery needs to be charged.

9357_book/wc_1ATT  7/6/01  4:10 PM  Page 9

Summary of Contents for 9357

































Reviews: