To program/reprogram an
outside number,
extension, or feature code
into a personal list
1
2
3
4
5
6
7
Press [
Program
]
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want to
program as items on your personal list(s) (see example
to the left)
Note:
Each phone number or feature code is stored as
a separate item.
Pick up handset
[dial tone]
Note:
If you are using the built-in speakerphone, you
must press a call appearance button, before you
proceed to Step 3.
or Dial Program code
[dial tone]
Dial Personal List number (1, 2, or 3)
[dial tone]
Dial list item (1, 2, 3...)
[dial tone]
Dial number you want to program (up to 24 digits)
Note:
If you are programming an outside number, be
sure to include a trunk code, if applicable.
Press [
#
]
[confirmation tone], [dial tone]
Number is stored
●
Repeat Steps 5-7 if you want to program
additional items on the same list; press [
Drop Test
]
and begin again at Step 1 if you want to program
items on another list
8
Hang up to end programming
Note:
Record your personal list items on the
Abbreviated Dialing list in the back of this booklet;
group, system, and enhanced lists can be obtained
from the System Manager.
●
To place a call using a
Dial appropriate AD list code:
personal, group, system,
List 1
or enhanced list
List 2
List 3
Dial desired list item (1, 2, 3...)
Call is dialed
Note:
You can program a list code on one of your
AD buttons for faster access to a list. To place a call,
●
●
●
●
[dial tone]
1
2
[ringback tone]
simply press the AD button and then dial the desired
list item.
11
