background image

user.

Key Words to Know

activate  

To begin or turn on the operation of a feature.

attendant  

The person who handles incoming and outgoing calls at the main

telephone console.

AUDIX  Audio Information Exchange, 

an optional voice mail and message service

which provides coverage for calls to you by recording callers' messages and reporting
Leave Word Calling messages.

call appearance  

A button used exclusively to place or receive calls. It has an assigned

extension number and is equipped with a red light and a green light.

console permission  

The authorization (from your System Manager) to initiate Call

Forwarding All Calls for an extension other than your own.

coverage  

Automatic redirection of calls from an unanswered voice terminal to another

voice terminal. Redirection could be to the extension of a receptionist, secretary,
co-worker, AUDIX, or Message Center. A person who provides coverage is a covering

DEFINITY® Communications System Generic 1  

The AT&T switch to which you

are connected. It transmits and receives voice and data signals for all communications
equipment in your network.

dial pad  

The 12 pushbuttons you use to dial a number and access features.

enhanced list  

One of the 4 types of Abbreviated Dialing lists; programmable only by

the System Manager. Contains telephone numbers useful to all system members, and
stores each of those numbers as a 3-digit list item.

extension  

A dialing number of 1 to 5 digits assigned to each voice terminal connected

to your DEFINITY Generic 1.

feature  

A special function or service, such as Conference, Hold, Send All Calls, etc.

feature code  

A dial code of 1, 2, or 3 digits which you use to activate or cancel the

operation of a feature.

group list  

One of the 4 types of Abbreviated Dialing lists; programmable by the

System Manager. Contains telephone numbers useful to members of a specific group,
and stores each of those numbers as a 2-digit list item.

handset  

The handheld part of the voice terminal which you pick up, talk into, and

listen from. Also known as the  receiver.

message retriever  

A person authorized by the System Manager to retrieve messages

for other users.

off-hook  

When the handset is removed from the cradle (for example, when you lift

the handset to place or answer a call).

on-hook  

When the handset is left in the cradle.

31

Summary of Contents for 7406BIS





































Reviews: