Tones and Their Meanings
Ringing tones
are produced by an incoming call. Handset tones are those which you
hear through the handset (receiver).
Ringing Tones
●
1 ring
— A call from another extension.
●
2 rings
— A call from outside or from the attendant.
●
3 rings
— A priority call from another extension, or from an Automatic Callback call
you placed.
●
ring-ping (half ring, not repeated)
— A call redirected from your voice terminal to
another because Send All Calls or Call Forwarding All Calls is active.
Handset Tones
●
busy tone
— A low-pitched tone repeated 60 times a minute; indicates the number
dialed is in use.
●
call waiting ringback tone
— A ringback tone with a lower-pitched signal at the
end; indicates that the extension called is busy, but the called party has been given
a call waiting tone.
●
●
●
●
●
●
●
call waiting tone
— One, two, or three beeps of high-pitched tone, not repeated;
indicates an incoming call is waiting to be answered. Number of beeps designates
the source: 1 for an internal call, 2 for an outside or attendant call, 3 for a priority
call.
confirmation tone
— Three short bursts of tone; indicates a feature activation or
cancellation has been accepted.
coverage tone
— One short burst of tone; indicates your call will be sent to another
extension to be answered by a covering user.
dial tone
— A continuous tone; indicates dialing can begin.
intercept/time-out tone
— An alternating high and low tone; indicates a dialing
error, a denial of the service requested, or a failure to dial within a preset interval
(usually 10 seconds) after lifting the handset or dialing the previous digit.
recall dial tone
— Three short bursts of tone followed by a steady dial tone;
indicates the feature request has been accepted and dialing can begin.
reorder tone
— A fast busy tone repeated 120 times a minute; indicates all trunks
are busy.
ringback tone
— A low-pitched tone repeated 15 times a minute; indicates the
number dialed is being rung.
30