Atag IGT9472MB, Instructions For Use Manual

Page: 51 / 72

EN 17
• If you press the pause button again within 5 minutes, the paused
cooking processes will resume.
A double audio signal will be heard, the hob resumes the settings as
they were set before the pause.
• If you do not undertake any further action within 5 minutes:
All active cooking zones will switch off automatically. After that
the pause button will keep flashing for 25 minutes to indicate the
cooking processes have been ended by the pause mode.
The hob automatically switches from the pause mode to the eco
standby mode after 25 minutes.
Recognising a mode
The eco standby mode
The red light next to the key button
flashes slowly.
The standby mode Not a single light is lit.
The childproof lock
mode The red light next to the key button is lit
constantly.
The pause mode
The red light next to the pause button
flashes.
Timer/Kitchen timer
Please note!
• There’s one timer/kitchen timer available per cooking zone.
• The timer/kitchen timer function can also be used without activating
an accompanying cooking zone.
Switching on the timer
• Press the timer/kitchen timer button of the cooking zone once.
The display of the timer lights up and you’ll see three zeroes flashing.
A + and - appear below.
• If you do not set a time with the + or - button, the timer will start
running automatically after 3 seconds. The timer can go as far as
9 hours and 59 minutes.
The red arrow pointing upwards lights up and the time increases.
• Press the timer/cooking timer button again to switch it off.
OPERATION