Atag IGT9472MB, Instructions For Use Manual

Page: 49 / 72

EN 15
OPERATION
Eco standby mode
In the eco standby mode the hob is switched off and it uses as little
energy as possible.
The hob can also be switched to the eco standby mode from the
standby mode and when cooking zones are still active.
Switching the hob to the eco standby mode
• Press the key button briefly.
A single audio signal sounds. The eco standby mode is active, the
red light next to the key button flashes slowly
.
From the eco standby mode you can’t immediately start cooking. To be
able to, the hob first needs to be switched to the standby mode.
Standby mode
In standby mode the induction hob is switched on, but all zones are off.
You can switch to the standby mode from the eco standby mode, or by
switching off all separate cooking zones.
From standby mode you can immediately start cooking. Press the
on/off button for the desired cooking zone or the wok burner or place a
pan on an induction zone and select the desired power.
Switching the hob from the eco standby mode to the standby mode
The red light next to the key button flashes slowly.
• Press the key button briefly to activate the standby mode.
You will hear a single audio signal. All lights on the hob are out,
except possibly the residual heat indicator ‘H’.
Tip!
The hob uses less than 0.5 Watt in the eco standby mode.
After 30 minutes in the standby mode, the hob will automatically switch
to the eco standby mode to prevent unnecessary energy consumption.
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH