Atag IGT9472MB, Instructions For Use Manual

Page: 50 / 72

EN 16
Child lock
Your induction hob is equipped with a childproof lock that lets you lock
the appliance. It prevents unintended switching on of the cooking zones.
Switching on the childproof lock
• Press the key button for 2 seconds.
A double audio signal will be heard. All buttons are now inactive,
except for the key button. The hob first switches to the eco standby
mode and then to the childproof lock mode. The red light is
constantly on.
• Press the child lock button again for 2 seconds to switch off the
childproof lock.
A single audio signal will be heard. The hob is now in standby
mode. The red light next to the key button is off.
Tip!
Set the hob to the childproof lock mode before cleaning the hob to
prevent it from accidentally switching on.
When the hob is set to childproof mode, it uses just as little energy as
when it is in eco standby mode.
Pause
With this pause function, you can set the entire hob to ‘pause’ for
5 minutes during cooking. The energy supply to the cooking zone will
stop, without losing settings. However, do remember that the cooking
zone will stay warm for some time; preferably remove delicate dishes
from the cooking zone.
Switching the hob to pause mode
• Press the pause button once.
A double audio signal will be heard and the red light next to the
pause button flashes.
▷ Any set timers/kitchen timers stop.
▷ All cooking zones are automatically switched back to setting 1
or 2; the wok burner will return to the lowest setting.
▷ All buttons are inactive, except for the key button and the
pause button. The on/off button of the individual cooking zones
also remain active; they do, however, react with a delay of two
seconds so that you can clean the control panel.
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
OPERATION