Asycube 50 & 80
Operating Manual
©
Copyright Asyril S.A.
000.100.501
Version: A1
Operating Manual - Asycube 50 & 80
38/45
Step 4
Parameters in memory can now be modified (by direct access with commands to the
Asycube, by functions in dll or by Asycube configuration page in HMI (see relative
documentations for more details)).
Step 5
When parameters are defined as
desired, replace selector 1 in
position
(D)
.
Step 6
Disconnect and reconnect the power cable (or switch off and switch on the power on the
Asycube).
The Asycube will take the parameters defined by the new startup.
Step 7
Replace the cover
(B)
and screw
the 4 screws
(A)
Use an torx key size 10 (0.9Nm)
1
2
3
4
(D)
(A)
(B)
