Asycube 50 & 80
Operating Manual
©
Copyright Asyril S.A.
000.100.501
Version: A1
Operating Manual - Asycube 50 & 80
7/45
The used LED are class 0 according to the norm EN 62471.
It is the responsibility of
customers to document their own application and instruct employees on procedures to limit
exposure to LED radiation. Following prevention agent can be suggested:
A.
Interpose, insofar as the job allows, a high pass filter at x nm depending on the color (see
2.6.5) under a fixed or adjustable connection between the source and the employee
B.
When the implementation of the foregoing is not possible, provide workers with goggles
or face shield suitable for blocking radiation beyond 700nm;
C. Prohibit or limit as possible direct access to the source (exposure in the axis of radiation).
D. Establish a security perimeter to prevent operators from approaching the source at
distances beyond the nominal ocular hazard recommended by the manufacturer
E. In all cases, ensure that the means used properly mitigate exposure variables
(characteristics of screens or goggles to choose based on wavelength which operators
are exposed).
Temperature
The active elements into the asycube
make the surfaces shown on the
picture heating up to 40°C in nominal
use. This temperature can
nevertheless increase to 55°C in
extreme use.
It is the responsibility of customers to
document their own application and
instruct employees on procedures to
avoid contact with these surfaces
Figure 1-2 :Specific warnings
Warranty information
You will find all the Asyril warranty information (duration, scope of warranty …) on the general
conditions of sale.
CE information
The declaration of incorporation as a partly completed machinery can be found here below.