Asycube 50 & 80
Operating Manual
©
Copyright Asyril S.A.
000.100.501
Version: A1
Operating Manual - Asycube 50 & 80
32/45
Locate the identification information
at the back of the product and
ensure that the product you have
received is the correct one (S/N).
Figure 3-1 : Product information (example)
Installation and storage environment
WARNING !
The Asycube must be mounted on a smooth, flat and strong surface. Ensure yourself
that the Asycube is not submitted to mounting flexure. Failure to do so would degrade
feeder performance.
Installation environment
The Asycube can be used under following conditions:
-
The asycube 50 and 80 are IP40
-
Working temperature: +5°C to +40°C
-
Humidity: 30% to 80%max. non-condensing
WARNING !
In the case humidity or temperature variation, note that it might affect the global
performances of the Asycube.
-
Avoid extreme electromagnetic waves, ultraviolet rays and radiation.
-
Avoid using the product in a place where the main unit or controller may be exposed to water
or oil droplets.
-
Clean room application: cleanliness class ISO7
WARNING !
Do not use the product in an atmosphere of corrosive gases.
Storage environment
The storage environment should be similar to the operating environment. In addition, you
should protect the Asycube against dust
