ASV PT-70, Service Manual

Page: 63 / 146

4. Remove the bolts securing the fan and spacer to
the engine, then remove the fan and spacer from
between the shroud and radiator as shown.
(fig. 8-8, 8-9)
5. Remove the radiator shroud from the machine.
(fig. 8-10)
Installation
1. To install the fan and fan shroud, reverse the
removal procedure.
Radiator/Oil Cooler
Removal
Personal injury can result from exposure to hot fluids
and components. Allow the machine to cool thoroughly
before attempting any type of service on the cooling or
hydraulic systems.
Cooling system conditioner contains alkali. Avoid con-
tact with skin and eyes.
NOTICE
Collect and contain liquids in suitable containers. Dispose of
all liquids according to local regulations and mandates.
1. Perform the fan guard and fan/shroud removal pro-
cedures.
2. Remove the bolts securing the rear belly plates to
the chassis and remove them. (fig. 8-11)
3. Attach a piece of 3/8” fuel line to the drain valve,
outlet, then twist the valve control counter clock-
wise to drain the cooling system. (fig. 8-12)
8-3
Rubber Track Loader
8. Radiator and Oil Cooler
8-8
8-11
8-12
8-9
8-10
!WARNING!
!WARNING!
Required Tools
Socket Wrench
Pliers
Screwdriver
Hydraulic Caps/Plugs (various sizes)
Drain Valve
Catch Container