ASV PT-70, Service Manual

Page: 89 / 146

4. Remove the air cleaner housing from the machine.
(fig. 12-18)
Installation
1. To install the air cleaner assembly, reverse the
removal procedure.
Engine
Removal
1. Perform the battery, air cleaner, and charge pump,
removal procedures in sections 11 and 12 of this
manual prior to starting this procedure.
2. Remove the hood assembly as described on page
7-5 of this manual.
3. Raise and support the operator enclosure (cab) as
described on page 4-2 of this manual.
4. Perform steps 2-7 of the exhaust removal proce-
dure on page 12-2 of this manual.
5. Remove the center belly pan from the machine.
6. Remove the front motor mount bolts (2) from the
machine. (fig. 12-19)
7. Remove the rear motor mount bolts (2) from the
machine. (fig. 12-20)
12-5
Rubber Track Loader
12. Engine
12-18
Required Tools
Combination/Socket Wrenches
Angle Iron or Similar (approx. 43” long)
Tie Down or Ratchet Strap
Forklift/Engine Hoist
Pry Bar
12-19
12-20