ASV PT-70, Service Manual

Page: 51 / 146

6-5
Rubber Track Loader
6. Operator Enclosure
Seat (MP-1 & MP-2)
Removal
1. Remove the bolts (2) securing the cab to the chas-
sis. They are located inside the cab in the upper
front corners of the foot well. (fig. 6-21)
2. Raise and secure the cab as described on page 4-
2 of this manual.
3. Remove the four nuts securing the seat to the cab.
4. Remove the seat partially to expose the seat
switch harness located behind the seat. (fig. 6-23)
5. Disconnect the harness and then remove the seat
from the machine. (fig. 6-24)
Seat
Installation
1. To install the seat, reverse the removal procedure.
Interior Side Panel, LT (MP-2)
Removal
1. Remove the mounting screws (5) and washers
securing the panel to the chassis. (fig. 6-25)
2. Remove the cup holder mounting screws (4) and
remove the cup holder from the panel. (fig. 6-26)
Required Tools
Combination/Socket Wrench
6-21
6-24
6-22
6-23
Required Tools
Phillips Type Screwdriver
6-25
6-26