Asus Z10PR-D16, User Manual

Page: 96 / 180

4-36 Chapter 4: BIOS setup
SEL Components [Enabled]
Allows you to enable or disable all features of system Event Logging during boot.
Configuration options: [Disabled] [Enabled]
• The following items appears only when you set SEL Components to [Enabled].
• All values changed here do not take effect until computer is restarted.
Erase SEL [No]
Allows you to choose options for erasing SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows you to choose options for reactions to a full SEL.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Codes [Error code]
Disable the logging of EFI Status Codes, or log only error code, or only progress code
or, both.
Configuration options: [Disabled] [Both] [Error code] [Progress code]
Bmc self test log
This item allows the system to log the report returned by BMC self test command.
Erase log [Erase, On every reset]
This item erases the log options.
Configuration options: [Yes, On every reset] [No]
When log is full [Clear log]
This item allows you to clear logs when it is full.
Configuration options: Clear Log] [Do not log anymore]
Bmc network configuration
The sub-items in this configuration allow you to configure the BMC network parameters.
Configuration Address source DM_LAN1/LAN1 [Previous State]
This item allows you to configure LAN channel parameters statistically or dynamically (by
BIOS or BMC). Unspecified option will not modify any BMC network parameters during
BIOS phase.
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]
[DynamicBmcNonDhcp]