Asus Z10PR-D16 User Manual Download Page 29

Page: 29 / 180

2-11

13. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN1 /

CPU_FAN2.

DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if

you fail to plug this connector.

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes

or touches your skin, wash it off immediately, and seek professional medical help.

•

Ensure that the Thermal Interface

Material is spread in an even thin

layer.

•

Some heatsinks come with

pre-applied Thermal Interface

Material. If so, skip this step.

12. Apply some Thermal Interface Material

to the exposed area of the CPU that the

heatsink will be in contact with.

Summary of Contents for Z10PR-D16





















































































































































































Search results

Summary of Contents for Z10PR-D16

Reviews:

Related manuals for Z10PR-D16

Brands by name

Popular brands

Asus Z10PR-D16, User Manual

Search results

Summary of Contents for Z10PR-D16

Reviews:

Related manuals for Z10PR-D16

Brands by name

Popular brands