Asus Z10PR-D16 User Manual Download Page 49

Page: 49 / 180

2-31

LAN Activity LED connector (5-1 pin LAN34_LED1)

These leads are for 10G LAN activity LEDs on the front panel. Connect the LAN LED

cable to the backplane for LAN activity indication.

CPU, front, and rear fan connectors (4-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1,

FRNT_FAN2, FRNT_FAN3, FRNT_FAN4, FRNT_FAN5, REAR_FAN1, REAR_FAN2)

The fan connectors support cooling fans. Connect the fan cables to the fan connectors

on the motherboard, ensuring that the black wire of each cable matches the ground pin

of the connector.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components.

•

These are not jumpers! DO NOT place jumper caps on the fan connectors!

•

All fans feature the ASUS Smart Fan technology.

Summary of Contents for Z10PR-D16





















































































































































































Search results

Summary of Contents for Z10PR-D16

Reviews:

Related manuals for Z10PR-D16

Brands by name

Popular brands

Asus Z10PR-D16, User Manual

Search results

Summary of Contents for Z10PR-D16

Reviews:

Related manuals for Z10PR-D16

Brands by name

Popular brands