manualshive.com logo in svg

Asus TS110-E8-PI4, User Manual

Share
Download
Asus TS110-E8-PI4 User Manual Download Page 85

ASUS TS110-E8-PI4

4-29

Network Stack [Disabled]

Enables or disables the network stack feature. Configuration options: [Disable] [Enable]

The following items appears only when Network Stack is set to 

[Enabled].

Ipv4 PXE Support [Enabled]

Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be 

created. Configuration options: [Disable] [Enable]

Ipv6 PXE Support [Enabled]

Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be 

created. Configuration options: [Disable] [Enable]

4.4.18  Intel RC Drivers Version Detail

This item displays the Version String for the Intel RC Drivers.

4.4.17  Network Stack

Aptio Setup Utility - Copyright (C) 2014 American Megatrends, Inc.

        Advanced

Network stack 

[Disable]

Enable/Disable the 

network stack (Pxe and 

UEFI)

Aptio Setup Utility - Copyright (C) 2014 American Megatrends, Inc.

        Advanced

Intel CPU RC Version 

1.0.0.0

Memory RC Version 

1.0.0.0

Intel SA RC Version 

1.0.0.0

Intel PCH RC Version 

1.0.0.0 

Summary of Contents for TS110-E8-PI4



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands