Asus TS110-E8-PI4 User Manual Download Page 108

Page: 108 / 146

5-12

Chapter 5: RAID configuration

5.3

Intel

Rapid Storage Technology enterprise

(Windows)

The Intel

Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID

10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the

Serial ATA connectors.

You can click

Rescan

to re-scan any attached hard disks.

Turn on the system to windows desktop.

Click the

Intel

Rapid Storage Technology enterprise

icon to display the main menu.

Your storage system is configured for data protection, increased performance and optimal

data storage capacity. You can create additional volumes to further optimize your storage

system.

To enter the Intel

Rapid Storage Technology enterprise utility under Windows operating

system:

You need to manually install the Intel

Rapid Storage Technology enterprise utility on a

Windows

operating system. Please refer to the installation instructions in

Chapter 6

Summary of Contents for TS110-E8-PI4



















































































































































Search results

Summary of Contents for TS110-E8-PI4

Reviews:

Brands by name

Popular brands

Asus TS110-E8-PI4, User Manual

Search results

Summary of Contents for TS110-E8-PI4

Reviews:

Brands by name

Popular brands