Asus TS110-E8-PI4 User Manual Download Page 104

Page: 104 / 146

5-8

Chapter 5: RAID configuration

5.2.3

Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a

RAID volume hard disk drive deletes all internal RAID structure on the drive.

To reset a RAID set:

From the utility main menu, select

3. Reset Disks to Non-RAID

and press <Enter>.

Press the up/down arrow keys to select the drive(s) or disks of the RAID set you want

to reset, then press <Space>. A small triangle before the Port number marks the

selected drive. Press <Enter> when you are done.

Press <Y> in the confirmation window to reset the drive(s) or press <N> to return to the

utility main menu.

Port Drive Model Serial # Size Status

0 ST3300656SS HWAS0000991753TR 279.3GB

Member Disk

1 ST3300656SS 37VN00009846RAJ1 279.3GB Member Disk

Select the disks that should be reset.

Resetting RAID disk will remove its RAID structures

and revert it to a non-RAID disk.

[ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

[

RESET RAID DATA

]

WARNING: Resetting a disk causes all data on the disk to be lost.

(This does not apply to Recovery volumes)

Summary of Contents for TS110-E8-PI4



















































































































































Search results

Summary of Contents for TS110-E8-PI4

Reviews:

Related manuals for TS110-E8-PI4

Brands by name

Popular brands

Asus TS110-E8-PI4, User Manual

Search results

Summary of Contents for TS110-E8-PI4

Reviews:

Related manuals for TS110-E8-PI4

Brands by name

Popular brands