Asus TS110-E8-PI4 User Manual Download Page 138

Page: 138 / 146

6-24

Chapter 6: Driver installation

6.7

Installing the Intel

I210 Gigabit Adapter driver

This section provides the instructions on how to install the

Intel

I210 Gigabit Adapter

driver on the system.
To install the

Intel

I210 Gigabit Adapter

driver on Windows

Server 2008 R2:

Restart the computer.

2. Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

4. Click

Intel® I210 Gigabit Adapter Driver

in the

Drivers

menu of the main screen

to start the installation.

5. Click

Next

to continue.

From the

Program Maintenance

window, select

Modify

then click

Next.

Summary of Contents for TS110-E8-PI4



















































































































































Search results

Summary of Contents for TS110-E8-PI4

Reviews:

Related manuals for TS110-E8-PI4

Brands by name

Popular brands

Asus TS110-E8-PI4, User Manual

Search results

Summary of Contents for TS110-E8-PI4

Reviews:

Related manuals for TS110-E8-PI4

Brands by name

Popular brands