manualshive.com logo in svg

Asus RS720Q-E6 RS12, User Manual, Page: 70 / 166

Share
Download
Asus RS720Q-E6 RS12 User Manual Download Page 70

5-4

Chapter 5: BIOS setup

5.1.2 

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore 

the BIOS file when it fails or gets corrupted during the updating process. You can 

update a corrupted BIOS file using a USB flash drive that contains the updated 

BIOS file.

Prepare a USB flash drive containing the updated motherboard BIOS before 

using this utility.

To recover the BIOS using ASUS CrashFree BIOS 3
1.  Insert the USB flash disk that contains the BIOS file to the USB port.
2.  Turn on the system.
3.  The utility will automatically checks the devices for the BIOS file. When found, 

the utility reads the BIOS file and starts flashing the corrupted BIOS file.

4.  Restart the system after the utility completes the updating process.

DO NOT shut down or reset the system while recovering the BIOS! Doing so 

would cause system boot failure!

The recovered BIOS may not be the latest BIOS version for this motherboard. 

Visit the ASUS website (www.asus.com) to download the latest BIOS file.

Summary of Contents for RS720Q-E6 RS12







































































































































































Reviews:

No comments