Asus RS720Q-E6 RS12 User Manual Download Page 161

Page: 161 / 166

ASUS RS720Q-E6/RS12, RS724Q-E6/RS12

7-25

3. Type the command line

and mount the driver to the

system.

The driver version

and the OS label may

vary. Ensure that the

command line matches

your driver version and

operating system.

7.5.2

Red Hat

Enterprise Linux OS

You need to manually mount the Mellanox driver on a Red Hat

Enterprise Linux

OS.

For users using SUSE Linux Enterprise Server OS, follow the general

instructions in this section to mount the Mellanox driver on your system.

To mount the Mellanox driver
1. Login to the system as root.

2. Create a folder on the

desktop and copy the latest

Mellanox driver to the folder.

You can name the folder

as you like.

4. Type the command line and

install the driver.

Summary of Contents for RS720Q-E6 RS12







































































































































































Search results

Summary of Contents for RS720Q-E6 RS12

Reviews:

Related manuals for RS720Q-E6 RS12

Brands by name

Popular brands

Asus RS720Q-E6 RS12, User Manual

Search results

Summary of Contents for RS720Q-E6 RS12

Reviews:

Related manuals for RS720Q-E6 RS12

Brands by name

Popular brands