Asus RS720Q-E6 RS12 User Manual Download Page 105

Page: 105 / 166

ASUS RS720Q-E6/RS12, RS724Q-E6/RS12

6-3

6.1.3

RAID controller selection

You can choose either the LSI Software RAID Configuration Utility or the Intel

Matrix Storage Manager as the default utility to create RAID set(s). See

5. Intel

ICH10R SATA port S/W RAID setting

on page 4-9 for details.

6.1.4

Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID set(s)

using SATA HDDs. To do this:

1. Enter the BIOS Setup during POST.
2. Go to the

Main

menu >

IDE Configuration

, and then press <Enter>.

3. Set the

Configure SATA as

item to [RAID].

4. Save your changes, and then exit the BIOS Setup.

Refer to Chapter 5 for details on entering and navigating through the BIOS

Setup.

Summary of Contents for RS720Q-E6 RS12







































































































































































Search results

Summary of Contents for RS720Q-E6 RS12

Reviews:

Related manuals for RS720Q-E6 RS12

Brands by name

Popular brands

Asus RS720Q-E6 RS12, User Manual

Search results

Summary of Contents for RS720Q-E6 RS12

Reviews:

Related manuals for RS720Q-E6 RS12

Brands by name

Popular brands