Asus RS720Q-E6 RS12 User Manual Download Page 17

Page: 17 / 166

ASUS RS720Q-E6/RS12, RS724Q-E6/RS12

1-7

1.6

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive. Connect a USB floppy

disk drive to any of the USB ports on the front or rear panel if you need to use a

floppy disk.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

1. Redundant power supply and power fan

2. ASUS Z8NH-D12 Server Boards (RS720Q-E6/RS12); Z8PH-D12 SE/QDR

Server Boards (RS724Q-E6/RS12)

3.  System fans
4.  SATA/SAS backplane (hidden)
5.  Hot-swap HDD trays (SAS and SATA)

6. Front LED Boards

Turn off the system power and detach the power supply before removing or

replacing any system component.

Summary of Contents for RS720Q-E6 RS12







































































































































































Search results

Summary of Contents for RS720Q-E6 RS12

Reviews:

Related manuals for RS720Q-E6 RS12

Brands by name

Popular brands

Asus RS720Q-E6 RS12, User Manual

Search results

Summary of Contents for RS720Q-E6 RS12

Reviews:

Related manuals for RS720Q-E6 RS12

Brands by name

Popular brands