Asus RS720-E9-RS24-E User Manual Download Page 137

Page: 137 / 180

5-41

ASUS RS720-E9-RS24-E

User Password

To set a user password:

Select the User Password item and press <Enter>.

From the Create New Password box, key in a password, then press <Enter>.

Confirm the password when prompted.

To change a user password:

Select the User Password item and press <Enter>.

From the Enter Current Password box, key in the current password, then press

<Enter>.

From the Create New Password box, key in a new password, then press <Enter>.

Confirm the password when prompted.

To clear a user password:

Select the Clear User Password item and press <Enter>.

2. Select

Yes

from the Warning message window then press <Enter>.

Secure Boot

This item allows you to customize the Secure Boot settings.

Secure Boot

Allows you to enable or disable Secure Boot.

Configuration options: [Disabled] [Enabled]

Summary of Contents for RS720-E9-RS24-E





















































































































































































Search results

Summary of Contents for RS720-E9-RS24-E

Reviews:

Asus RS720-E9-RS24-E, User Manual, Page: 137 / 180

Search results

Summary of Contents for RS720-E9-RS24-E

Reviews: