Asus RS720-E9-RS24-E User Manual Download Page 120

Page: 120 / 180

5-24

Chapter 5: BIOS Setup

Network stack [Disabled]

Enables or disables the network stack feature.

Configuration options: [Disable] [Enable]

The following item appears only when

Network stack

is set to

[Enabled]

Ipv4 PXE Support [Disabled]

Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will

not be created.

Configuration options: [Disabled] [Enabled]

Ipv4 HTTP Support [Disabled]

Enables or disables the Ipv4 HTTP Boot Support. If disabled, Ipv4 HTTP boot option

will not be created.

Configuration options: [Disabled] [Enabled]

Ipv6 PXE Support [Disabled]

Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will

not be created.

Configuration options: [Disabled] [Enabled]

Ipv6 HTTP Support [Disabled]

Enables or disables the Ipv6 HTTP Boot Support. If disabled, Ipv6 HTTP boot option

will not be created.

Configuration options: [Disabled] [Enabled]

PXE boot wait time [0]

Wait time to press ESC key to abort the PXE boot.

Media detect time [1]

Wait time (in seconds) to detect media.

5.5.13 Network Stack Configuration

Summary of Contents for RS720-E9-RS24-E





















































































































































































Search results

Summary of Contents for RS720-E9-RS24-E

Reviews:

Asus RS720-E9-RS24-E, User Manual, Page: 120 / 180

Search results

Summary of Contents for RS720-E9-RS24-E

Reviews: