Asus RS720-E7/RS12 User Manual Download Page 63

Page: 63 / 190

ASUS RS720-E7/RS12; RS720-E7/RS12-E

4-11

7. Serial General Purpose Input/Output connectors

(8-1 pin PSGPIO 1/2, ISGPIO1, SGPIO1)

The SGPIO 1 connectors are used for the Intel Rapid Storage Technology

Enterprise SGPIO interface that controls the LED pattern generation, device

information and general purpose data.

The PSGPIO 1/2 connectors are used for PIKE card.

8. Serial port connectors (10-1 pin COM1/COM2)

These connectors are for the serial (COM) ports. Connect the serial port

module cable to one of these connectors, then install the module to a slot

opening at the back of the system chassis.

Summary of Contents for RS720-E7/RS12































































































































































































Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands

Asus RS720-E7/RS12, User Manual

Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands