Asus RS720-E7/RS12 User Manual Download Page 61

Page: 61 / 190

ASUS RS720-E7/RS12; RS720-E7/RS12-E

4-9

3. USB connectors (10-1 pin USB34, USB56; A-Type USB10)

These connectors are for USB 2.0 ports. Connect the USB module cables to

connectors USB34 and USB56, then install the modules to a slot opening at

the back of the system chassis. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed.

4. Hard disk activity LED connector (4-pin HDLED1)

This LED connector is for the storage add-on card cable connected to

the SATA or SAS add-on card. The read or write activities of any device

connected to the SATA or SAS add-on card causes the front panel LED to

light up.

Summary of Contents for RS720-E7/RS12































































































































































































Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands

Asus RS720-E7/RS12, User Manual

Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands