Asus RS720-E7/RS12 User Manual Download Page 16

Page: 16 / 190

Chapter 1: Product introduction

1-6

• The ports for the PS/2 keyboard, PS/2 mouse, USB, VGA, and Gigabit LAN

do not appear on the rear panel if motherboard is not present.

• *The port is for ASUS ASMB6-iKVM controller card only.

1.5

Rear panel features

The rear panel includes the expansion slots, system power socket, and rear fans.

The middle part includes the I/O shield with openings for the rear panel connectors

on the motherboard.

PS/2 keyboard port

USB ports

LAN port 1

VGA
port

6 Expansion slots

LAN port 2

Power cord

connector

PS/2 mouse port

Redundant power

supply

DM_LAN 1 port *

LAN port 3

LAN port 4

Summary of Contents for RS720-E7/RS12































































































































































































Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands

Asus RS720-E7/RS12, User Manual

Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands