Asus RS720-E7/RS12 User Manual Download Page 149

Page: 149 / 190

ASUS RS720-E7/RS12; RS720-E7/RS12-E

6-33

6.3.7

Setting the Boot array in the BIOS Setup Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when

creating multi-RAID using the Intel

Rapid Storage Technology.

To set the boot array in the BIOS:

Set at least one of the arrays bootable to boot from the hard disk.

1. Reboot the system and press <Del> to enter the BIOS setup utility during

POST.

2. Go to the

Boot

menu and select the boot option priority.

3. Use up/down arrow keys to select the boot priority and press <Enter>. See

section

4.7 Boot menu

for details.

4. From the

Exit

menu, select

Save Changes & Exit

, then press <Enter>.

5. When the confirmation window appears, select

Yes

, then press <Enter>.

Summary of Contents for RS720-E7/RS12































































































































































































Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands

Asus RS720-E7/RS12, User Manual

Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands