Asus RS720-E7/RS12 User Manual Download Page 41

Page: 41 / 190

2-21

ASUS RS720-E7/RS12; RS720-E7/RS12-E

2.8

Removable/optional components

You may need to remove previously installed system components when installing

or removing system devices. Or you may need to install the optional components

into the system. This section tells how to remove/install the following components:
1. System fans

2. Redundant power supply module (optional)

3. ASUS PIKE RAID card (optional)

4. ASUS ASMB6-iKVM (optional)

Ensure that the system is turned off before removing any components.

2.8.1

System fans

To uninstall the system fans:
1. Press inward to release the system

fan.

2. Lift the fan, then set aside.
3. Repeat step 1 to 2 to uninstall the

other system fans.

Summary of Contents for RS720-E7/RS12































































































































































































Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands

Asus RS720-E7/RS12, User Manual

Search results

Summary of Contents for RS720-E7/RS12

Reviews:

Related manuals for RS720-E7/RS12

Brands by name

Popular brands