Asus RS520-E8-RS12-E User Manual Download Page 76

Page: 76 / 202

Chapter 4: Motherboard information

4-20

Memory error LED (MEMERRA1, MEMERRA2, MEMERRB1, MEMERRB2,

MEMERRC1,

MEMERRC2, MEMERRD1, MEMERRD2, MEMERRE1, MEMERRE2,

EMERRF1,

MEMERRF2, MEMERRG1, MEMERRG2, MEMERRH1, MEMERRH2)

The DIMM warning LEDs light up to indicate failure on the corresponding DIMMs.

The warning LEDs only functions when you enable the ASUS ASMB8.

CATT LED (CATTERR_LED1)

The CATT LED indicates that the system has experienced a fatal or catastrophic error

and cannot continue to operate.

CATT LED (CATTERR_LED1)

The CATT LED indicates that the system has experienced a fatal or catastrophic error

and cannot continue to operate.

Summary of Contents for RS520-E8-RS12-E











































































































































































































Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands

Asus RS520-E8-RS12-E, User Manual

Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands