Asus RS520-E8-RS12-E User Manual Download Page 173

Page: 173 / 202

7-3

ASUS RS520-E8-RS8, RS520-E8-RS12-E

To create a RAID driver disk in Windows

environment

1. Start Windows

2. Place the motherboard support DVD into the optical drive.

3. Go to the

Make disk

menu, and then select the type of RAID driver disk you want to

create.

4. Insert a floppy disk into the USB floppy disk drive.

5. Follow succeeding screen instructions to complete the process.

Write-protect the floppy disk to avoid computer virus infection.

To create a RAID driver disk in Red Hat

Enterprise Linux server environment

Insert a blank formatted high-density floppy disk to the USB floppy disk drive.

2. Type

dd if=XXX.img of=/dev/fd0

to decompress the file into the floppy disk from

the following path in the support DVD:

For LSI MegaRAID Driver

\Drivers\C60x LSI RAID\Driver\makedisk\Linux

3. Eject the floppy disk.

Summary of Contents for RS520-E8-RS12-E











































































































































































































Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands

Asus RS520-E8-RS12-E, User Manual

Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands