Asus RS520-E8-RS12-E User Manual Download Page 18

Page: 18 / 202

Chapter 1: Product introduction

1-6

1.4

Front panel features

The barebone server displays a simple yet stylish front panel with easily accessible features.

The power and reset buttons, LED indicators, and USB ports for each Node are located on

the front panel.

Refer to the

1.7.1 Front panel LEDs

section for the LED descriptions.

Turn off the system power and detach the power supply before removing or replacing any

system component.

RS500-E8-RS8

RS520-E8-RS12-E

HDD Bay 1

HDD Bay 5

HDD Bay 2

HDD Bay 6

HDD Bay 3

HDD Bay 7

HDD Bay 4

HDD Bay 8

slim optical drive (optional)

refer to 1.7 LED information

Power button

Location button

Reset button

2 x USB 3.0 ports

VGA port

USB 2.0 ports

Reset button

HDD Bay 5

HDD Bay 6

HDD Bay 7

HDD Bay 8

HDD Bay 9

HDD Bay 10

HDD Bay 11

HDD Bay 12

Location button

Power button

refer to 1.7 LED information

HDD Bay 1

HDD Bay 2

HDD Bay 3

HDD Bay 4

Summary of Contents for RS520-E8-RS12-E











































































































































































































Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands

Asus RS520-E8-RS12-E, User Manual

Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands