Asus RS520-E8-RS12-E User Manual Download Page 195

Page: 195 / 202

7-25

ASUS RS520-E8-RS8, RS520-E8-RS12-E

7.7 Intel

Rapid Storage Technology enterprise 4.0

installation

This section provides the instructions on how to install the Intel

Rapid Storage Technology

enterprise 4.0 on the system.

You need to manually install the Intel

Rapid Storage Technology enterprise 4.0 utility on a

Windows

operating system.

To install the Intel

Rapid Storage Technology enterprise 4.0 utility:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive, and find the utility

menu.

Click the

Intel

Rapid Storage Technology enterprise 4.0

to begin installation.

When the

Welcome to the Setup Program

appears, click

Next

to start the installation.

Summary of Contents for RS520-E8-RS12-E











































































































































































































Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands

Asus RS520-E8-RS12-E, User Manual

Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands