Asus RS520-E8-RS12-E User Manual Download Page 172

Page: 172 / 202

7-2

Chapter 7: Driver installation

7.1

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install an

operating system to the independent hard disk drive or bootable array. This part provides the

instructions on how to install the RAID controller drivers during OS installation.

7.1.1

Creating a RAID driver disk

The system does not include a floppy drive. You have to use a USB floppy drive when

creating a SATA RAID driver disk.

If you have created RAID sets with the LSI Software RAID configuration utility, the boot

priority of the SATA optical disk drive has to be manually adjusted. Otherwise, the system

will not boot from the connected SATA ODD.

A floppy disk with the RAID driver is required when installing Windows

XP / Server 2003 or

Linux operating system on a hard disk drive that is included in a RAID set. You can create a

RAID driver disk in DOS (using the Makedisk application in the support DVD).
To create a RAID driver disk in DOS environment

Place the motherboard support DVD in the optical drive.

Restart the computer, and then enter the BIOS Setup.

Select the optical drive as the first boot priority to boot from the support DVD. Save

your changes, and then exit the BIOS Setup.

Restart the computer.

From the

Create Driver Diskette Menu, u

se the arrow keys to select a sub-menu. To

create the RAID driver disk, select

C610 INTEL RAID Driver

then press <Enter>.

Create Driver Diskette Menu

C610 INTEL RAID Driver

Write DMI

FreeDOS command prompt

Locate the RAID driver you need then place a blank, high-density floppy disk to the

floppy disk drive.

Press <Enter>.

Follow screen instructions to create the driver disk.

Summary of Contents for RS520-E8-RS12-E











































































































































































































Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands

Asus RS520-E8-RS12-E, User Manual

Search results

Summary of Contents for RS520-E8-RS12-E

Reviews:

Related manuals for RS520-E8-RS12-E

Brands by name

Popular brands