Asus Rampage II Extreme User Manual Download Page 74

Page: 74 / 196

2.8

Installing accessories

2.8.1

Installing the optional fan

Install the optional fan only if you are using a passive cooler or a water cooler.

Installing the optional fan with an active CPU cooler will interfere with the airflow

and destabilize the system.

1. Position the fan above the pipe

and heatsink assembly.

2. Fit the fan to the grooved edge of

the heatsink.

3. Carefully pull the fan until it snugly

fits the heatsink, and then connect

the fan cable.

4. The photo shows the fan installed

on the motherboard.

• Plug the optional fan cable to the CHA_FAN3 or OPT_FAN1/3 connector on

the motherboard.

• Make sure the optional fan is installed correctly to prevent damage to the

fan and motherboard components.

2-46

Chapter 2: Hardware information

Summary of Contents for Rampage II Extreme





































































































































































































Search results

Summary of Contents for Rampage II Extreme

Reviews:

Related manuals for Rampage II Extreme

Brands by name

Popular brands

Asus Rampage II Extreme, User Manual

Search results

Summary of Contents for Rampage II Extreme

Reviews:

Related manuals for Rampage II Extreme

Brands by name

Popular brands