Asus Rampage II Extreme User Manual Download Page 185

Page: 185 / 196

ROG Rampage II Extreme

5-7

5.2.2

Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the

motherboard layout may vary with models, but the installation steps remain the

same.

1. Prepare two SLI-ready graphics

cards.

2. Insert the two graphics card into the

PCIEX16 slots. If your motherboard

has more than two PCIEX16 slots,

refer to Chapter 2 in this user

manual for the locations of the

PCIEX16 slots recommended for

multi-graphics card installation.

3. Ensure that the cards are properly

seated on the slots.

4. Align and firmly insert the SLI bridge

connector to the goldfingers on

each graphics card. Ensure that the

connector is firmly in place.

5. Connect two independent auxiliary

power sources from the power

supply to the two graphics cards

separately.

6. Connect a VGA or a DVI cable to the

graphics card.

Goldfingers

SLI bridge

Summary of Contents for Rampage II Extreme





































































































































































































Search results

Summary of Contents for Rampage II Extreme

Reviews:

Related manuals for Rampage II Extreme

Brands by name

Popular brands

Asus Rampage II Extreme, User Manual

Search results

Summary of Contents for Rampage II Extreme

Reviews:

Related manuals for Rampage II Extreme

Brands by name

Popular brands