Asus Rampage II Extreme User Manual Download Page 187

Page: 187 / 196

ROG Rampage II Extreme

5-9

5.2.4

Installing the device drivers

Refer to the documentation that came with your graphics card package to install

the device drivers.

5.2.5

Enabling the NVIDIA

SLI™ technology

After installing your graphics cards and the device drivers, enable the SLI feature

in NVIDIA

Control Panel under the Windows

Vista™ operating system.

Launching the NVIDIA Control Panel

You can launch the NVIDIA Control Panel by the following two methods.
A. Right click on the empty space of the Windows

desktop and select

NVIDIA Control Panel

The NVIDIA Control Panel window appears (See

Step B5 on page 5-13).

B1. If you cannot see the NVIDIA Control Panel item

in step (A), select

Personalize

• Ensure that your PCI Express graphics card driver supports the

NVIDIA

SLI™ technology. Download the latest driver from the NVIDIA

website (www.nvidia.com).

• If you are using a Triple SLI system, ensure to install the NVIDIA

3-way

SLI driver under Windows

Vista™. The NVIDIA 3-way SLI technology is

supported by Windows

Vista™ only.

Summary of Contents for Rampage II Extreme





































































































































































































Search results

Summary of Contents for Rampage II Extreme

Reviews:

Related manuals for Rampage II Extreme

Brands by name

Popular brands

Asus Rampage II Extreme, User Manual

Search results

Summary of Contents for Rampage II Extreme

Reviews:

Related manuals for Rampage II Extreme

Brands by name

Popular brands