manualshive.com logo in svg

Asus Rampage II Extreme, User Manual, Page: 116 / 196

Share
Download
Asus Rampage II Extreme User Manual Download Page 116

3-34

Chapter 3: BIOS setup

3.6 

Power menu

The Power menu items allow you to change the settings for the Advanced Power 

Management (APM). Select an item then press <Enter> to display the configuration 

options.

3.6.1 

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state 

to be used for system suspend.  

Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

3.6.2 

Repost Video on S3 Resume [No]

Determines whether to invoke VGA BIOS POST on S3/STR resume.  

Configuration options: [No] [Yes] 

3.6.3 

ACPI 2.0 Support [Disabled]

Specifies the Advanced Configuration and Power Interface (ACPI) version 

supported. Configuration options: [Disabled] [Enabled]

3.6.4 

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface 

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When 

set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. 

Configuration options: [Disabled] [Enabled]

   Select Screen

    Select Item

+-   Change Option

F1   General Help

F10   Save and Exit

ESC   Exit

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

Suspend Mode 

 

[Auto]

Repost Video on S3 Resume  

[No]

ACPI 2.0 Support 

 

[Disabled]

ACPI APIC Support 

 

[Enabled]

  APM Configuration

  Hardware Monitor

Select the ACPI state 

used for System 

Suspend.

BIOS SETUP UTILITY

Extreme Tweaker     Main    Advanced    

Power

    Boot    Tools    Exit

Summary of Contents for Rampage II Extreme





































































































































































































Reviews:

No comments