2-12
Chapter 2: RAID configuration
6.
From the
Create New Volume
screen, move the cursor to the
RAID Disk
column of an
available disks then press <+>, <->, or <Space> to include the disks into the array.
By default, the
RAID Disk
field shows
No
before volume creation. This field is grayed out
under the following conditions:
•
The disk does not meet the minimum requirements for use in a RAID volume.
•
The disk is not large enough to mirror existing data on the primary drive.
•
The disk is already part of another volume.
7.
If a selected disk contains no files or data, the utility adds the disk to the array.
